How To Make Silver Spoon Jewelry

How To Make Silver Spoon Jewelry

Silver spoon jewelry is a popular trend these days, and it is easy to see why. Not only is it a unique and stylish way to accessorize, but it is also a very affordable option. If you are interested in making your own silver spoon jewelry, here is a simple guide to help you get started.

What You Will Need

-Silver spoons (you can find these at flea markets, antique stores, or online)

-Jump rings (these can also be found at flea markets, antique stores, or online)

-Chain (you can find this at any craft store)

-Needle-nose pliers

-Wire cutters

Step One

The first step is to select the silver spoons that you want to use for your jewelry. It is important to choose spoons that are in good condition, with no missing pieces or dents.

Step Two

Once you have selected your spoons, it is time to prepare them for jewelry making. Use a wire cutter to cut the spoons into small pieces. You will want to make sure that the pieces are all roughly the same size, so it is a good idea to use a ruler or a measuring tape to help you make accurate cuts.

Step Three

Next, use a pair of needle-nose pliers to open a jump ring. This is the ring that you will use to attach the spoon pieces to the chain.

Step Four

Now it is time to assemble the jewelry. Start by threading one of the spoon pieces onto the jump ring. Then, close the jump ring using the pliers. Repeat this process until all of the spoon pieces are attached to the jump ring.

Step Five

Finally, attach the jump ring to the chain. Use the pliers to open the jump ring, then loop it around the chain. Close the jump ring and you are done!

How To Repair Gold Plated Jewelry

Gold plated jewelry is susceptible to scratches and tarnishing, but with a little bit of TLC, it can last for years. Here are a few tips on how to repair gold plated jewelry:

READ
How To Open A Jewelry Shop

If your gold plated jewelry is scratched, you can buff it out with a soft cloth. If the scratch is deep, you may need to take it to a jeweler for repair.

To clean gold plated jewelry, use a mild soap and water. Be sure to dry it thoroughly afterwards, as any moisture can cause the gold to tarnish.

If your gold plated jewelry starts to tarnish, you can polish it with a polishing cloth.

If you have any other questions about how to repair gold plated jewelry, be sure to consult a jeweler.

How To Make A Log Jewelry Box

If you’re looking for a rustic way to store your jewelry, a log jewelry box is the perfect solution. Not only is it a beautiful piece of décor, but it’s also functional and can keep your jewelry organized and easy to find.

Here’s how to make your own log jewelry box:

1. Find a piece of wood that will make a good jewelry box. The ideal size is around 12 inches long, 6 inches wide, and 3 inches tall.

2. Cut the wood to size. You can use a saw or a power drill to do this.

3. Use a drill to make a hole in the top of the wood for your jewelry to go through. The hole should be about 1 inch in diameter.

4. Use a saw to cut a slit in the side of the wood. This slit should be about 3 inches long and 1 inch wide.

5. Sand the wood until it’s smooth.

6. Paint or stain the wood, if desired.

7. Put your jewelry in the hole in the top of the wood.

8. Put the wood in a place where it will be visible and admired.

How To Line A Jewelry Box With Felt

There are a few reasons why you might want to line your jewelry box with felt. Maybe you want to protect your jewelry from scratches, or keep it from sliding around in the box. Maybe you just think it looks nicer. Whatever the reason, lining a jewelry box with felt is a pretty easy project.

All you need is a piece of felt big enough to cover the bottom of your jewelry box, and some fabric glue. Cut the felt to the size of the bottom of your jewelry box, and glue it in place. That’s it!

READ
Is Jewelry A Liquid Asset

How To Make A Jewelry Bag

Making a jewelry bag is a great way to keep your jewelry organized and easy to find. You can make a jewelry bag out of just about any material you want, but a sturdy fabric is best so that it can hold up to wear and tear.

To make a jewelry bag, you’ll need:

-Sturdy fabric (a good option is canvas)
-Scissors
-Ruler or a straight edge
-Sewing machine
-Thread
-Pins
-Iron

1. Cut your fabric to the desired size. You’ll want the fabric to be at least twice as wide as the height of your jewelry bag, and at least as long as the height plus the width of your jewelry bag.

2. Fold the fabric in half so that the two shorter sides are together. Pin them in place.

3. Sew along the pinned edge, using a 1/2 inch seam allowance.

4. Turn the fabric right-side out.

5. Iron the fabric so that it’s nice and smooth.

6. Fold the top of the fabric down 1/2 inch and iron it in place.

7. Sew along the top edge, using a 1/2 inch seam allowance. This will create a casing for the drawstring.

8. Cut a piece of ribbon or cord the desired length. This will be the drawstring for your jewelry bag.

9. Feed the cord or ribbon through the casing, and tie a knot at the end.

10. Your jewelry bag is now finished!